product - DC/DC converter module scope - IEC62109-1/UL1741, installed inside combiner box electrical - 200V to 1000Vdc, floating or grounded input; floating or grounded isolated output.
61000-6-1 indicates 61000-4-2 for ESD, and has a test methods for ungrounded equipment. Questions 1. Has any industry group established additional ESD test requirments/methods? 2. Should the two methods (floor-standing and table top) both be applied? 3. 8kV adequate test level? 4. Would the automotive ISO10605 test methods/levels be more representative? thanks, Brian - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
