Is there a similar list for Europe? Sincerely,
Dieter Paasche x7211 -----Original Message----- From: Thomas Cokenias [mailto:t...@tncokenias.org] Sent: March 14, 2013 10:56 AM To: Paasche, Dieter Cc: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] FCC and very low-power wireless devices Below 30 MHz there are different limits, above 30 MHz 15.209 limits are same as class B. On Mar 14, 2013, at 7:27 AM, Paasche, Dieter wrote: > Can I use any frequency if my transmission level is below the class B limit? > > Sincerely, > > Dieter Paasche x7211 > > > -----Original Message----- > From: Thomas Cokenias [mailto:t...@tncokenias.org] > Sent: March 12, 2013 5:30 PM > To: EMC-PSTC@LISTSERV.IEEE.ORG > Subject: Re: [PSES] FCC and very low-power wireless devices > > Hi John > > Section 15.209 has general requirements for radiated emissions for > intentional radiators (transmitters). At these frequencies you would be > allowed 200 uV/m at 3m, not much but you aren't allowed higher power until > you get to 902-928 MHz band. > > best regards > > Tom > > On Mar 12, 2013, at 12:28 PM, John Woodgate wrote: > >> Does the FCC allow very low power wireless devices (transmitting speech for >> assisted hearing for disabled people) to operate on 863 MHz or nearby? >> -- >> OOO - Own Opinions Only. See www.jmwa.demon.co.uk SHOCK HORROR! >> Dinosaur-like DNA found in chicken and turkey meals John Woodgate, J >> M Woodgate and Associates, Rayleigh, Essex UK >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society >> emc-pstc discussion list. To post a message to the list, send your >> e-mail to <emc-p...@ieee.org> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Attachments are not permitted but the IEEE PSES Online Communities site at >> http://product-compliance.oc.ieee.org/ can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://listserv.ieee.org/request/user-guide.html >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell >> <mcantw...@ieee.org> >> >> For policy questions, send mail to: >> Jim Bacher: <j.bac...@ieee.org> >> David Heald: <dhe...@gmail.com> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. To post a message to the list, send your > e-mail to <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell > <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher: <j.bac...@ieee.org> > David Heald: <dhe...@gmail.com> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. To post a message to the list, send your > e-mail to <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell > <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher: <j.bac...@ieee.org> > David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
