Hi All,
I'm currently working on a DO-160 design that has pulsed fields between 1000 and 2000 v/m. I'm happy specifying filter parts for 200 v/m, but I'm curious if there are things I should take into account with the much higher peak fields, even though the duty cycle is low. Quantifiable suggestions are most welcome. Thanks, Derek Walton NCE #438 12790 Route 76 Poplar Grove, IL 61065, USA W: 1 815 986 6685 M: 1 815 566 5655 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>