Hi everyone, I'm new on this list and it's my first message.
I have a question about the 61000-4-6 test and the EUT set-up. If i have a product with several board inside and for example two sensors connected to them. It's a little bit confused in my mind. EUT and sensors are considered as auxiliary equipments ? or is it one EUT with several units ? How is realized the decoupling on the cable between the board and the sensor ? Regards, Guillaume - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
