Note that the committees for ANSI Z535.4 and ISO 3864 have done a lot of work over the last 15 years to allow a single, combined format to be used in both the USA and the rest of the world.
Mike Sherman Product Safety and Compliance Engineer Graco Inc. ----- Original Message ----- From: "Michael Loerzer" <loerzer_mob...@globalnorm.de> To: EMC-PSTC@LISTSERV.IEEE.ORG Sent: Friday, August 16, 2013 6:34:47 AM Subject: [PSES] AW: [PSES] ANSI Z 535 in Canada Many thanks. Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Globalnorm GmbH Kurfürstenstr. 112 10787 Berlin Phone +49 30 3229027-51 Cell +49 170 3229027 Fax +49 30 3229027-59 Mail michael.loer...@globalnorm.de » globalnorm.de Globalnorm GmbH, Sitz der Gesellschaft: Kurfürstenstr. 112, 10787 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 Von: emc-p...@ieee.org [mailto:emc-p...@ieee.org] Im Auftrag von Douglas Nix Gesendet: Donnerstag, 15. August 2013 16:36 An: Michael Loerzer Cc: EMC-PSTC@LISTSERV.IEEE.ORG Betreff: Re: [PSES] ANSI Z 535 in Canada There is no Canadian equivalent for product safety signs and warnings. CSA Z432 calls out CSA Z321, but the scope of that standard specifically excludes its use with products. Based on that, most Canadian companies use either the ANSI Z535 standards, the International standards or a combination of these. Sent from my iPhone Doug Nix d...@complianceinsight.com Mobile: (519) 729-5704 Office:(519) 650-4753 Fax: (519) 653-1318 On 2013-08-15, at 1:34, Michael Loerzer < loerzer_mob...@globalnorm.de > wrote: Hello , Are the standards ANSI Z 535.4 „ Standard for Product Safety Signs and Labels“ and Z 535.6 “ Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials ” accepted in Canada ? If not, does anybody know similar CSA standards? Best regards Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Globalnorm GmbH Kurfürstenstr. 112 10787 Berlin Phone +49 30 3229027-51 Cell +49 170 3229027 Fax +49 30 3229027-59 Mail michael.loer...@globalnorm.de » globalnorm.de Globalnorm GmbH, Sitz der Gesellschaft: Kurfürstenstr. 112, 10787 Berlin Geschäftsführer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < emc-p...@ieee.org > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < emcp...@radiusnorth.net > Mike Cantwell < mcantw...@ieee.org > For policy questions, send mail to: Jim Bacher < j.bac...@ieee.org > David Heald < dhe...@gmail.com > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < emc-p...@ieee.org > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < emcp...@radiusnorth.net > Mike Cantwell < mcantw...@ieee.org > For policy questions, send mail to: Jim Bacher < j.bac...@ieee.org > David Heald < dhe...@gmail.com > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to < emc-p...@ieee.org > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas < emcp...@radiusnorth.net > Mike Cantwell < mcantw...@ieee.org > For policy questions, send mail to: Jim Bacher < j.bac...@ieee.org > David Heald < dhe...@gmail.com > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
