Dear All, I have a question about insulation requirements of the EN61010:2010 standards (clause 6).
Are the insulation requirements of EN61010 / IEC61010:2010 identical to those found in the latest IEC60950 (2009 I believe, including all amendments)? Basically I need to know if I use a third party certified power supply marked to EN60950:2009, will it meet the insulation requirements of EN61010 (clearance, creepage, protective bonding...etc) Maybe in a nutshell, I am wondering where the EN61010 insulation requirements were derived from. Are they the same source as the EN60950 requiements. Thanks, Gary Darnel - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>