Hi Ian, The last company I was with used to specify a single manufacturer's fan in the UL report including supply voltage / current / CFM) and then (with UL's agreement) include the words "or any recognised equivalent component".
During the factory inspections, if a fan was being fitted from a different manufacturer we would have to produce the fan specification to show that we met the requirements i.e. the fan was UL recognised, supply voltage was the same, current was equal to or less than specified in the report and the CFM was equal to or greater than specified. Thanks, Chris. -----Original Message----- From: John Woodgate [mailto:j...@jmwa.demon.co.uk] Sent: 13 December 2013 11:23 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Cooling fan safety query In message <ed08bb5be2d841e0a1b0ca499f924...@dbxpr07mb206.eurprd07.prod.outlook.com> , dated Fri, 13 Dec 2013, "McBurney, Ian" <ian.mcbur...@allen-heath.com> writes: >I believe the fans are listed for the flammability of the plastic body >but I may be wrong. It would surely be worthwhile to check whether UL have confirmed electrical safety, because if not, the test house is probably justified. So you would need to list all the fans that could be used, or find a less exacting test house. -- OOO - Own Opinions Only. With best wishes. See www.jmwa.demon.co.uk Nondum ex silvis sumus John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>