HI All,
I'm looking to replace two of my aging trusty cables used in my EMI chamber. They are used mainly for hooking up the room wall to antenna, so flexibility, ability to hold up to occasional standing on, low loss and ideally carry a few hundred watts of power would be ideal. I keep two, mainly one is used below a GHz, the other could be used up to 40 GHz. I'd be grateful for folks that share there positive and negative experiences with different types and suppliers. Off list might be best, thanks. Sincerely, Derek Walton L F Research - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
