Hi Bostjan Sorry for not being so specific. I know that the PSU shall comply with EN 60950-1, it's a USB PSU. But it comes in different versions with amongst other with the UK plug.
I found a British web page that informed that over 1000 different plugs have been found over the last couple of years that did not comply with the BS 1363. So my concern is to find the right parts of BS 1363 or a separate standard that addresses the plug of a wall-plug type equipment. Best regards, Mr. Kim Boll Jensen -----Oprindelig meddelelse----- Fra: Boštjan Glavič [mailto:bostjan.gla...@siq.si] Sendt: 27. januar 2014 16:41 Til: Kim Boll Jensen Cc: EMC-PSTC@LISTSERV.IEEE.ORG Emne: Re: [PSES] UK plug Hi Kim, What will be the PSU used for? Standard depends on the application. If the PSU will be used to supply information technology equipment then standard EN 60950-1 is applicable. BS 1363 is used just to verify plug part. I hope it helps. Best regards, Bostjan On 27. jan. 2014, at 16:32, "Kim Boll Jensen" <k...@bolls.dk<mailto:k...@bolls.dk>> wrote: Hi I’m trying to find the right standard for a wall-plug PSU with integrated BS 1363 plug. I have bought the BS 1363-1, -3 and -5 standards, very expensive :-( but they all exclude plugs with integrated components, or am I wrong? What is the right standard to use? Best regards, Mr. Kim Boll Jensen Bolls Aps Ved Gadekæret 11F DK-3660 Stenløse Phone: +45 48 18 35 66 k...@bolls.dk<mailto:k...@bolls.dk> www.bolls.dk<http://www.bolls.dk> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net<mailto:emcp...@radiusnorth.net>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
