Hi folks, Article 12-3 of the directive states that for all products identified in Annex IV one of the following is required- Assessment of conformity per Annex VIII, Examination procedure per Annex IX plus Annex VIII point 3, or Full quality assurance procedure per Annex X. My understanding of the directive is apart from this there is no requirement to have a full quality assurance procedure in place. Is that correct?
thanks David P. Nyffenegger, PMP, SM-IEEE Product Development Manager Bell and Howell 3791 South Alston Avenue Durham, NC 27713 Phone: 919.767.6419 Web: www.bellhowell.net - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
