Re: [PSES] anti-islanding relay

[Doug Powell]

Bostjan, The anti-islanding relay ‎may be any relay, approved for the application. This means you need to use a relay which is certified to an appropriate component standard and properly rated for the system voltage in your application. Look into the reference standards mentioned in UL 1741 section 3.3.   For example, ‎UL 60947-4-1A is a possibility.   Thanks, - doug Douglas Powell http://www.linkedin.com/in/dougp01   From: BoĹĄtjan Glavič Sent: Monday, September 8, 2014 10:14 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Reply To: BoĹĄtjan Glavič Subject: [PSES] anti-islanding relay Dear experts,   Does anyone know where I can find spacing requirement for anti-islanding relay? I need to know required distance when contact is open. UL1741 does not include such requirement.   Do I need to simulate short accross the relay's contact during fault condition testing?   Best regards, Bostjan     - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>