Am confused over this. Cannot determine if thin line is a PDF 'artifact', or if
that is the new image for the EEE mark. The HTML files for the directive links
to a blank image:
http://eur-lex.europa.eu/resource.html?uri=CELEX:32012L0019.ENG.xhtml.L_2012197EN.01006602.tif.jpg
Anyone have a better source?
Brian
From: Monrad Monsen [mailto:monrad.mon...@oracle.com]
Sent: Wednesday, September 24, 2014 10:55 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: Re: [PSES] Crossed-out wheeled bin symbol
Hi Scott,
If you look at the Recast WEEE directive 2012/19/EU annex IX, you will see that
the crossed-out wheeled bin symbol does not have a black bar below the symbol.
http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2012:197:0038:0071:EN:PDF
Note: If you look at the WEEE directive in a PDF provided by Europa, you will
see that they put a small thin horizontal line at the end of the main directive
and at the end of each annex. For annex IX, the crossed-out wheeled bin
symbol is at the end of the annex, but the symbol uses bold lines. The later
small thin horizontal line marking the end of the annex should not be confused
as being a part of the crossed-out wheeled bin symbol.
Monrad
Note: The statements and opinions expressed here are my own and do not
necessarily represent those of any company I work for.
On 9/12/2014 9:52 AM, Scott Xe wrote:
Dear All,
I have learnt that in near future, the black bar below the crossed-out wheeled
bin symbol will be removed similar to the one used in battery directive. Have
anyone heard the same?
Thanks and regards,
Scott
On 12 Sep, 2014, at 10:56 pm, Denis Ryskamp <denis_rysk...@trimble.com> wrote:
Gary:
Needed:
1) A unique identification of the producer (Brand name, registration
number,...)
2) The crossed-out wheeled bin in accordance with Directive
3) Put on market after 13 august 2005 shall be identified by at least one
of the following:
a) Date of manufacture/put on market, in uncoded text per ISO 8601 or
other coded text, for which the code shall be made available for treatment
facilities.
b) Additional mark used in conjunction with the crossed-out wheeled bin
(underline) The directive has the dimensional proportions. Height of the bin
itself is 4mm minimum.
The crossed out wheeled bin symbol to be displayed in a visible, legible and indelible form on the product itself, near Producer ID, except for in exceptional cases where this is not possible because of the size or function of the product. If the symbol cannot be applied to the product due to product size or function, then the marking shall be printed on the packaging, in the instructions for use, and in the warranty.
The directive has the dimensional proportions. Height of the bin itself is
4mm minimum.
From: Gary McInturff [mailto:gary.mcintu...@esterline.com]
Sent: Friday, September 12, 2014 10:30 AM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Visible - legible
Does anyone have a standards definition of visible - legible? In this particular instance it's for the WEEE symbol for an ITE product. I don't see a reference to the definition here. Anybody else? Is it a fixed height say 4mm, or is there some reference to readable from 1 meter (another non-definition because readable isn't defined),
Gary McInturff
Reliability/Compliance Engineer
Esterline Interface Technologies
Featuring
ADVANCED INPUT, GAMESMAN,
and LRE MEDICAL products
600 W. Wilbur Avenue
Coeur d'Alene, ID 83815-9496
Toll Free: 800-444-5923 X1XXX
Tel: (208) 635-8
Fax: (208) 635-8
www.esterline.com/interfacetechnologies
Technology, Innovation, Performance.
"Information in or attached to this e-mail message may be subject to export control restrictions of the International Traffic in Arms Regulations (ITAR) (22 CFR pts. 120-130) or the Export Administration Regulations (EAR) (15 CFR pts. 730-774). Before exporting this information outside the United States or releasing it to a foreign person in the United States, you need to determine whether a license under the EAR or the ITAR is required to do so. If you have any questions about this obligation, please contact me."
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion
list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@radiusnorth.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>