Chuck:
I would delete that particular rule of thumb from my mayonnaise jar full of rules. 3 dB is easy to get with a ferrite on a high impedance data line at 800 MHz, but a lot harder to obtain at 37 MHz on a stepper motor drive line. Ed Price WB6WSN Chula Vista, CA USA From: Grasso, Charles [mailto:charles.gra...@echostar.com] Sent: Tuesday, March 03, 2015 9:38 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Ferrite Cores on cables and possible reduction Hello all, It is generally reported (at least as far as I can remember) that a ferrite bead clamped on a cable will provide - typically- only about 3db of improvement as a general rule. I am now in a position of looking for the source of that "common knowledge" .. Does anyone have such a reference? Best Regards Charles Grasso Compliance Engineer Echostar Communications (w) 303-706-5467 (c) 303-204-2974 (t) 3032042...@vtext.com (e) charles.gra...@echostar.com (e2) chasgra...@gmail.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>