Hello Grace, Consider IEC 60335-2-73 or IEC 60335-2-74 for the immersion heater portion. These standards do have some requirements for motors. I can only see the index, so I don't know how they would apply to the circulation pump.
Ted Eckert Compliance Engineer Microsoft Corporation ted.eck...@microsoft.com The opinions expressed are my own and do not necessarily reflect those of my employer. -----Original Message----- From: Grace Lin [mailto:graceli...@gmail.com] Sent: Wednesday, March 4, 2015 2:17 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] EN Test Standards for Sous Vide Water Immersion Circulator System Dear Members, Could someone please advise EN test standards (LVD and EMCD) for a Sous Vide Water Immersion Circulator, such as the one found from Amazon at http://www.amazon.com/Anova-Sous-Vide-Immersion-Circulator/dp/B00GT753W8? The one interested incorporates a submersed induction motor in the water. I took a quick look at the list of EMC harmonized standards, the possible standards are: EN 55014-1 and EN 55014-2 EN 60730-1, EN 60730-2-9, EN 60730-2-15 If these standards are not applicable, I guess generic standards apply. Thank you very much for your time and I look forward to your advice. Best regards, Grace Lin - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>