I would appreciate recommendations for power quality monitors/analyzers to use for occasional field use. There are a couple of archive threads related to this (1999 and 2006) where a few manufacturers are shared. I've searched the web several times in the past few weeks and it appears that there is a wide cost range depending on sample rate, single vs. three phase, low voltage only, networked, etc. and that the marketing term 'low cost' is relative. ;-)
The power supplies with which I am working have a 20ms hold-up spec and are 85-264VAC rated. Ideally it would be networked in some fashion, whether built-in Ethernet (TCP/IP) or tethered via USB or RS232 to a PC that is networked which may remain in-situ for hours to weeks depending on the test requirement. Is there a make/model that you think has an obvious price/performance benefit and/or one that is quite low cost if evaluating rent vs purchase? I have read datasheets from Fluke, Dranetz, Yokogawa, Hiok, Megger, PSL, Setra, Rockwell Automation, ACScout, ACR Systems and a few others which escape me at the moment. Thanks for reading. Cheers, Adam - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
