It depends on whether Britain joins EFTA or not. If it does, all EU Directives will probably continue to be adopted. In any case, most exports will still have to meet the relevant EMC standards, and if the Directive didn't apply within Britain, imported horrible emitters could not be controlled.
It's 'islands', please, over 1000 of them. With best wishes DESIGN IT IN! OOO Own Opinions Only www.jmwa.demon.co.uk J M Woodgate and Associates Rayleigh England We live in exiting times -----Original Message----- From: ce-test, qualified testing bv - Gert Gremmen [mailto:g.grem...@cetest.nl] Sent: Saturday, June 25, 2016 12:25 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] New EMC Directive 2014/30/EU I suppose that after the recent developments on "The Island" it won't be brought into UK law anymore.... Regards, Ing. Gert Gremmen Approvals manager ---------------------------------------------------------------------------- -------- + ce marking of electrical/electronic equipment Independent Consultancy + Services Compliance Testing and Design for CE marking according to EC-directives: - Electro Magnetic Compatibility 2004/108/EC - Electrical Safety 2006/95/EC - Medical Devices 93/42/EC - Radio & Telecommunication Terminal Equipment 99/5/EC + Improvement of Product Quality and Reliability testing Education Web: www.cetest.nl (English) Phone : +31 10 415 24 26 ------------------------------------------------------------------- This e-mail and any attachments thereto may contain information that is confidential and/or protected by intellectual property rights and are intended for the sole use of the recipient(s) named above. Any use of the information contained herein (including, but not limited to, total or partial reproduction, communication or distribution in any form) by persons other than the designated recipient(s) is prohibited. If you have received this e-mail in error, please notify the sender either by telephone or by e-mail and delete the material from any computer. Thank you for your co-operation. From: McCallum, Andy [mailto:andy.mccal...@mottmac.com] Sent: Friday 17 June 2016 12:29 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] New EMC Directive 2014/30/EU Hi The old EMC Directive 2002/108/EC was brought into UK law by the Statutory Instruments (SI) 2006 No. 3418. As of the 16 April the New EMC Directive 2014/30/EU replaced 2002/108/EC. However, I can find no reference for a new SI bringing in the new directive. Will a new SI be enacted? If so when? Regards Andy Andy McCallum BEng (Hons), MIET, CEng Senior EMC Engineer - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
