Disclaimer: The following answer is based solely on circumstantial evidence only and I can provide no specific evidence of its veracity.
Papua New Guinea uses the Australian plug and runs at 240 V, 50 Hz. Based on that, and its proximity to Australia, it is possible that would follow the Australian regulation, or at least accept products tested to AS/NZS standards. English is one of the official languages, so in theory, manuals and warnings on an Australian product would be accepted. The PNG government website<http://www.pm.gov.pg/> is down right now, so I can make wild speculation such as this without a high risk of being caught making things up as I go. Ted Eckert Microsoft Corporation The opinions expressed are my own and do not necessarily reflect those of my employer, residents of Papua New Guinea or anybody who pressed the red button from a previous message. From: Jim Hulbert [mailto:jim.hulb...@pb.com] Sent: Friday, July 15, 2016 10:39 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Papua New Guinea Regulatory Requirements I've been asked if there are any regulatory requirements for EMC & Product Safety in Papua New Guinea. I've done a bit of searching and all I can find is Type Approval requirements for radio equipment. I can't find any requirements for equipment that does not contain a radio communication function. I am looking for requirements for commercial products, not consumer. Does anyone know of any requirements that I'm overlooking? Thanks. Jim Hulbert ________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
