ISO, International Standardization Organization, Guide to the Expression of Uncertainty in Measurement, GUM ISO, General Requirements for the Competence of testing and calibration laboratories, ISO 17025 http://www.bipm.org/en/publications/guides/gum.html
Brian From: Richard Nute [mailto:ri...@ieee.org] Sent: Tuesday, September 20, 2016 1:18 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Measurement Accuracy I was wondering if anyone was aware of any guidance documents that provided acceptable levels of uncertainty when conducting various tests. I didn’t know what “uncertainty” is, so I did a Google search and found this reference: https://www.wmo.int/pages/prog/gcos/documents/gruanmanuals/UK_NPL/mgpg11.pdf Of particular interest is 1.2, which discusses “pass-fail.” In both product safety and EMC compliance, the result is “pass” or “fail.” The document says: “Often, a test is not a measurement: tests normally lead to a ‘yes/no’ answer or a ‘pass/fail’ result. (However, measurements may be part of the process leading up to a test result.)” So, our standards specify tests and test limits, pass or fail. Just looking for some additional guidance documents or standards that would help me convince the powers that be that such errors are unacceptable. Well, according to the document, you need to take into account what you call “errors” as they are not errors but different measurements that need to be accounted for in determining the “pass-fail.” At the end of the document are two references, which are much more detailed. Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>