Hi Bostjan! Can note (c) in Table 3E be applied to this product? I think it is justifiable to extend the protective bonding rules to the PE connection; i.e. to pass the bonding test or to verify via inspection that the PE conductor is "not smaller" than the mains supply - but that's just my opinion.
-Ken On Wed, Nov 30, 2016 at 10:53 PM, Boštjan Glavič <bostjan.gla...@siq.si> wrote: > Dear experts > > > > I hope there are some experts dealing with IEC 60950-1 standard. We have a > product that has rated input current 130A. Unit is intended for permanent > connection to mains and provide special terminals for 3 phases and bolt > with stud for PE connectio. > > > > Question is how should we evaluate dimension of this PE stud according to > clause 2.6.4.2, 3.3.5 and table 3E of IEC 60950-1 since values in the table > go only up to 80A rated current. > > > > Thank you for your support. > > > > Best regards, > > Bostjan > > > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>