For a cost, the IECEE publishes group and national differences for each combination of ‘major’ standard and the state.
For less cost, the TRF indicates, in general form, the group and national differences that must be addressed per the report. Building code is one of the principal drivers for national differences. Building code is influenced by 'common' practices and geology and local climatology and the qualities of the local brew. Brian From: Vincent Lee [mailto:000008e6c8d35910-dmarc-requ...@ieee.org] Sent: Saturday, June 24, 2017 6:47 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Questions on IEC Standards Adaption Hi all, Good morning, What are the differences between BS EN 62368-1:2014 and IEC 62368-1 Edition 2.0 2014-02 ? I was told that usually it is after IEC has published a standard, then other organisations like BSI or DIN will adapt the IEC standard as their national standards, e.g. BS and DIN, it is true? What are some the major considerations when organisations like BSI and DIN have in mind when adapt the IEC standards? Hope to hear from you soon. Thank you. Vincent Regards, Vincent - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>