Hi Vincent:
Here is the 4.1.1 text from the Committee Draft for Voting, IEC 62368-1 3rd
edition:
Internal and external components and subassemblies that comply with IEC 60950-1
or IEC 60065 are acceptable as part of equipment covered by this standard
without further evaluation other than to give consideration to the appropriate
use of the component or subassembly in the end-product.
Best regards,
Rich
From: Vincent Lee [mailto:000008e6c8d35910-dmarc-requ...@ieee.org]
Sent: Tuesday, September 05, 2017 4:21 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] IEC 62368-1, 3rd edition Clause 4.1.1
Hi all,
Good evening,
May I know is the following Clause going to included in the coming IEC 62368-1,
3rd edition ?
Clause 4.1.1 extract from IEC 62368-1, 1st (2010),
" Components and subassemblies that comply with IEC 60950-1 or IEC 60065 are
acceptable
as part of equipment covered by this standard without further evaluation other
than to give
consideration to the appropriate use of the component or subassembly in the
end-product. "
Hope to hear from you soon.
Thank you.
Vincent
Regards, Vincent
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html
Attachments are not permitted but the IEEE PSES Online Communities site at
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used
formats), large files, etc.
Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher: <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>
