JW That's almost certainly true - t'was ever the case, regardless of the continent/country J
HOWEVER, since the trade sanctions on Russia after the Crimea takeover and the "invasions" in Ukraine began to bite, Russia has had a policy of promoting Russian self-reliance over anything else (in trade) in order to try to ensure that it can produce as much of what it needs from internal manufacturers/service providers, rather than allowing those products/services to be provided from non-Russian sources (even from their close Eastern European trading partners - there is an association name for those, but I can't think of what that is at the moment!) John E Allen W.London, UK From: John Woodgate [mailto:j...@woodjohn.uk] Sent: 03 December 2017 22:54 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] EAC Mark in Russia Western Europe has been found to have some 'dodgy' test houses, too, so it may not be all political. John Woodgate OOO-Own Opinions Only J M Woodgate and Associates www.woodjohn.uk Rayleigh, Essex UK On 2017-12-03 22:45, John Allen wrote: Probably due to Putin's desire to promote (by any means - including regulation!) for everything to be done in Russia, not elsewhere! John E Allen W. London, UK From: Carl Newton [mailto:emcl...@gmail.com] Sent: 03 December 2017 22:20 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] EAC Mark in Russia Brian, I occasionally do work for a very large ITE product company with a worldwide presence and so I've been involved in international certs for a few of their products. This year we learned that Russia started to reject all EAC certs not issued by a Russian national lab. The other CU nation's certs were being rejected. I believe that Belarus has been working on legal action against Russia with the position that Russia is violating agreements. But I had to obtain a 2nd EAC cert from a Russian lab so that this company could resume their exports to Russia. The big-name labs with global market access groups that I spoke with are aware of this. This was the status as of mid-summer. Best regards, Carl On 11/29/2017 2:25 PM, Kunde, Brian wrote: Greetings. I would love to hear your story about dealing with the EAC mark and shipping products to Russia. Though most all countries have laws, acts, or directives on the books, most are not enforced across the board, yet focuses primarily on mass produced consumer electronics, computers, etc.. Individual or custom built equipment, such as scientific/laboratory equipment generally gets in such countries without much trouble. However, our department has been asked to looking into the current status of the EAC marking and what it takes to get single built instruments into Russia. Any information on this would be helpful. We have talked to a couple 3rd party labs and of course they want the entire gambit including full certification testing for Safety, EMC, and RoHS by an accredited lab and a full certification program with factory inspections, the works, blah blah blah. This approach is totally out of the question for the few products that we sell into this market. Let's be reasonable here. So far we haven't had any issues (unless we include a PC in the shipment) but if things are changing we would like to stay on top of things. I would love to hear from you. Thanks for all comments and stories. The Other Brian _____ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>