Simple answer – because the requirements of the EU are all necessarily the requirements of other regimes. CE shows an assumption of compliance to EU, it does not show or assume compliance to any other regime unless that regime has identical requirements or unless that regime is willing to accept other than their own requirements to show compliance. When and if Brexit occurs, it may take a while for the UK to adjust what it sees as required conformity issues. So, it is understandable, since existing standards produced by the EU bodies are in their law, that they would still accept the mark for a while. How long, who knows. Thanks
Dennis Ward This communication and its attachements contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient(s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail or attachments(s) are free from computer virus or other defect. Thank you. From: Richard Nute <ri...@ieee.org> Sent: Thursday, January 17, 2019 10:50 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Brexit requirements for UK manufacturers. * CE mark is replaced by UK mark. Hmm. I wonder why the UK or any country can’t recognize the CE mark as indicative of the relevant performance of the product? Rich - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
