Hi Amund, No, it's required for Part certification also.
Check 15.19: (a) In addition to the requirements in part 2 of this chapter, a device subject to certification, or Supplier's Declaration of Conformity shall be labelled as follows: (1) Receivers associated with the operation of a licensed radio service, e.g., FM broadcast under part 73 of this chapter, land mobile operation under part 90 of this chapter, etc., shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. (2) A stand-alone cable input selector switch, shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules for use with cable television service. (3) All other devices shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Michael. Michael Derby Senior Regulatory Engineer Director ACB Europe Join ACB for a training seminar in Copenhagen on 6 and 7 March or Milan on 5 and 6 June, 2019: https://acbcert.com/seminars/2019-Wireless-Approvals-Workshop/2019-Wireless- Approvals-Workshop.html Certification Resource for the Wireless Industry Web: www.acbcert.com e-mail: micha...@acbcert.com Mobile phone: (+44) 7939 880829 (UK area code) Corporate office phone: USA: (+1) 703 847 4700 -----Original Message----- From: Amund Westin [mailto:am...@westin-emission.no] Sent: 12 February 2019 13:57 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Fwd: [PSES] FCC label This label text is only for products under SDoC, right? This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Certified products labled with FCC ID do not need this text on a label, right? Best regards Amund -------- Original Message -------- Subject: [PSES] FCC label Date: 2019-02-12 13:12 From: Amund Westin <am...@westin-emission.no> To: EMC-PSTC@LISTSERV.IEEE.ORG Is this the current valid guide for FCC labeling: https://fccid.io/blog/wp-content/uploads/2018/05/FCC-ID-Guide-Document.pdf Cheers! Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
