Hi Frank, If you’re reading S2/S8 I’m guessing you’re in the semiconductor manufacturing equipment SME industry like I am. Welcome. You might want to see if our employeer will send you to the SEMI Standards face to face meetings at their Milpitas HQ April 1-5. You’ll meet a lot of SME EHS peers there and have an opportunity to see S2 and S8 ‘from the inside’ (perhaps not always the best point of view).
The number of EU regulations relevant to SME can vary greatly depending on technologies embedded in the equipment. Look out for pressure vessels, intentional transmitters (RF tag readers, Bluetooth mice and keyboards), processes that might occur in intentional explosive atmospheres. Definitely also read through the EU Commission’s guide to the machinery directive and the ‘blue guide’ for CE marking. These things are ever-moving targets. I’ve been working in EU product compliance (and others) since ’95, and I’m still catching up. That’s probably why it’s become a career rather than a task. Cheers, -Lauren Crane Tokyo Electron From: Nyffenegger, Dave <dave.nyffeneg...@bhemail.com> Sent: Friday, February 15, 2019 1:32 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Intro to Safety If you will be working on CE marked machinery then review the requirements for the technical file in the Machinery Directive. Also review requirements in the Low Voltage Directive whether machinery or not. -Dave From: Frank Tang [mailto:00000d3fa4ae712a-dmarc-requ...@listserv.ieee.org] Sent: Friday, February 15, 2019 2:15 PM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: [PSES] Intro to Safety Hi Compliance Peers, I'm fairly new to compliance, with 4-5 years EMC experience on ITE products for Americas, Europe, Asia, and some Nebs understanding. Recently began a new opportunity, which encompasses EMC and Product Safety for automation. Only begun reading SEMI S2/S8, and IEC 61010-1. My questions are: 1. Additional standards I should learn? 2. Besides EMC and Safety testing testing what other documents is needed for safety, ie. critical component list? 3. How long does the whole process take? Any help would be great. -Frank - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
