My experience is that they are way behind on harmonization of requirements with the EN/IEC technical requirements. They are working to come into the 21st century but will, in the end, require national NOM certification even if it is to the EN/IEC requirements; they have allowed some simpler paths in the past but these seem to be phasing out and replaced by NOM. Unfortunately, the NOM certification is only a 1 year certification and it has to be renewed each year (maybe even retesting); presumably this is in lieu of factory follow-up to maintain the certification. Further, if your product has a radio (wireless, Bluetooth, etc) it requires Mexican testing, approvals and registration.
>From what I see, every (developing) country wants to get into the cert & registration game. This has all been made easier by the development of IEC standards which are being harmonized for the major markets and all are easily adopted by additional countries (very little requirements development cost, all borne by the big boys in the IEC committees). However, in order to have some control it is straightforward to develop a bureaucracy to administer local certification and registration to use their mark. If the country doesn't have local qualified folks to deal with this, just implement internal test houses for safety , EMC and everything else then require that all product be tested in country to get their mark (until the lab staff is fully qualified) after which MRAs can be developed to accept outside work to get local acceptance. The power supply for your laptop shows the path that everything is on. :>) br, Pete Peter E Perkins, PE Principal Product Safety & Regulatory Affairs Consultant PO Box 23427 Tigard, ORe 97281-3427 503/452-1201 IEEE Life Fellow <mailto:p.perk...@ieee.org> p.perk...@ieee.org From: Koester, Helmut <h.koes...@psi-laser.de> Sent: Wednesday, February 27, 2019 4:53 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Mexico compliance approval for IT equipment Hello group, does anybody know if it there is any way to bring IT Equipment into the Mexican market without NOM certificate only based on CE marking and CE test documentation? Regards Helmut PSi Laser GmbH Helmut Koester <mailto:h.koes...@psi-laser.de> mailto:h.koes...@psi-laser.de - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> > David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>