This is likely based on the NEC which does not allow the conduit to be the sole means of grounding.  This said, I doubt the addition of the copper conductor will make much difference in a real life scenario. 

Doug
--

Douglas E Powell
doug...@gmail.com
https://www.linkedin.com/in/dougp01 


From: ken.ja...@emccompliance.com
Sent: May 14, 2019 9:36 PM
To: EMC-PSTC@LISTSERV.IEEE.ORG
Reply-to: ken.ja...@emccompliance.com
Subject: Re: [PSES] Just curiosity

I should have said that for lightning, all the conduit needed to do was act as a lightning rod.

Ken Javor
Phone: (256) 650-5261




From: Ken Javor <ken.ja...@emccompliance.com>
Reply-To: Ken Javor <ken.ja...@emccompliance.com>
Date: Tue, 14 May 2019 21:47:10 -0500
To: <EMC-PSTC@LISTSERV.IEEE.ORG>
Conversation: Just curiosity
Subject: Re: [PSES] Just curiosity

The steel conduit is all-around protection.  I doubt it is one continuous piece, but as long as sections make ohmic connections, I don’t see a problem. It’s just acting as a lightning rod.

Ken Javor
Phone: (256) 650-5261



From: Rene Charton <rene.char...@tuv.com>
Date: Wed, 15 May 2019 00:56:06 +0000
To: Ken Javor <ken.ja...@emccompliance.com>, "EMC-PSTC@LISTSERV.IEEE.ORG" <EMC-PSTC@LISTSERV.IEEE.ORG>
Conversation: Just curiosity
Subject: RE: Just curiosity

I guess the steel conduit is for electrostatic shielding, but probably cannot carry the surge current if a lightning strikes.
Is the steel conduit one continuous tube? I doubt that.
 

Kind regards
 
René Charton
 


Care for our planet, think before you print.
保护环境 三思而印
保護環境 三思而印

This email and any attachments is intended for use only by the specified addresses and may contain information that is privileged, confidential or exempt from disclosure under applicable law. We cannot guarantee the completeness of messages transmitted by this e-mail, and will not be responsible for errors, omissions, corruption or virus in the contents of this message or any attachments that arise as a result of this e-mail transmission or any modifications made to this message after sending by us.

If you have received this email in error, please notify us immediately by reply email and immediately delete this message and any attachments from your system. Please be noted that any use, dissemination, distribution or copying of this email is strictly prohibited.


From: Ken Javor <ken.ja...@emccompliance.com>
Sent: Wednesday, May 15, 2019 08:20
To: EMC-PSTC@LISTSERV.IEEE.ORG
Subject: [PSES] Just curiosity

In the below pictures, galvanized steel conduit is paralleled by copper conductor that is a lightning conductor to ground.

Question: why is that necessary?





Ken Javor
Phone: (256) 650-5261
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html>
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.

Website:      http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html>
List rules:     http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher  <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>

-
----------------------------------------------------------------

This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc.

Website: http://www.ieee-pses.org/
Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>

Reply via email to