Hi Daniel, I am not sure the specifics regarding your question (eg. Why you are importing), or what quantity you mean by limited (I have seen people refer to 10, or 10,000 as being a limited quantity 😊). However, the relevant FCC guidance can be checked here:
https://www.fcc.gov/oet/ea/importation#sec3 (please check FAQ #1) And this may also refer you to KDB Publication 741304<https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=57012> depending on your situation/quantity. Please note, not every country has the same rules as this, and in fact some countries don’t have any provisions at all, so please just be careful if you need to ship anywhere else in the world. Hope this helps! Many thanks Rob Robert Campling Manager | Global Market Access TÃœV SÃœD Ltd Mob: +44 (0) 7967 650973 TÃœV SÃœD's Commitment regardless of Brexit<https://www.tuv-sud.co.uk/uk-en/about-tuev-sued/tuev-sued-in-the-uk/tuev-sued-product-service/tuev-sued-product-service-news/tuv-suds-commitment-regardless-of-brexit-outcome> [cid:image001.jpg@01D44077.22C811D0] From: Rodriguez, Daniel (ESP) <drodrig...@ecolab.com> Sent: 21 June 2019 14:37 To: EMC-PSTC@listserv.ieee.org Subject: {Ext} [PSES] Trial of units compliance but without FCC Id Good morning all There is any FCC rule that allows temporary deploy a limited number of devices for customer testing with you FCC Id?. This device has been tested and pass by the lab but is pending of review by the TCB. I mean to conduct a limited trial of units that are compliance but without FCC Id label Thank you for your answer Kind Regards / Saludos cordiales / Mit freundlichen Grüßen Daniel RodrÃguez CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
