Good morning everybody There is a table E.2 related to Reduction of Pollution Degrees in EN 61010-1. I am a little confuse how to use ☹ For example: If we have equipment in Pollution Degree 3 environment and we want test internally for Pollution Degree 2, we need to use an enclosure IPx7 or IPx8 as a minimum but only in uncontrolled environment type B. Right? Is this the only solution to use tested equipment for Pollution Degree 2 in Pollution Degree environment (Industrial)??
Thank you for your answer I wish you a nice weekend Kind Regards / Saludos cordiales / Mit freundlichen Grüßen Daniel Rodríguez Sr. Equipment Compliance Specialist EMEA -------------------------------------------------- NALCO | ECOLAB T +34 673556249 E drodrig...@ecolab.com CONFIDENTIALITY NOTICE: This e-mail communication and any attachments may contain proprietary and privileged information for the use of the designated recipients named above. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>