Hi Chet, It depends on the jurisdiction your product is destined for:
USA : ANSI B11.19 or one of the machine-specific B11 standards. Injection molding machines ANSI B151.1 Canada: CSA Z432 for général machinery applications EU: EN 953 (as noted by Pete Perkins) International: ISO 12100, ISO 14120 and any relevant type C standard (machine specific). Best, Doug Nix [email protected] Mobile: (519) 729-5704 > On Oct 26, 2020, at 16:51, Chester Summers <[email protected]> > wrote: > > > Greetings, all— > > Is there a general machinery requirement that a service access panel on a > mains powered equipment somehow be permanently attached to the machine (e.g. > hinged) if the panel itself has warning decals affixed to it? > I looked back in the PSES archive for a safety standard reference and came up > empty. I’m searching for standards-based guidance on permanence of the > access panel itself, if it happens to be completely removable and is > therefore at some risk of being misplaced. > > Thank you and best regards, > Chet Summers > > > This email and any files transmitted with it from Charles Machine Works are > confidential and intended solely for the use of the individual or entity to > which they are addressed. - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used > formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher <[email protected]> > David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
