It looks very promising.
My only hesitation is that the two screws that hold this together do not appear 
to be tamperproof, which is a requirement for these types of adaptors in 
Australia, but may not be a requirement in the UK. I would think you should be 
able to find a helpful regulator in the UK who could address this, or maybe 
even the people at PowerConnections.
Mike Sherman
Graco Inc.

>     On 12/15/2020 12:27 PM Rodriguez, Daniel (ESP) 
> <0000123de38bd494-dmarc-requ...@listserv.ieee.org> wrote:
>      
>      
> 
>     Good afternoon all
> 
>     Going back to this question, I found below plug approved BS1363, fixed 
> and with a BSI Kitemark Licence No. KM 23223
> 
>     Do you think it is appropriate for use even is adaptor?
> 
>     Thank you
> 
>      
> 
>     https://www.powerconnections.co.uk/convert_eurotouk_scp3.htm
> 
>      
> 
>     Kind Regards / Saludos cordiales / Mit freundlichen Grüßen
> 
>      
> 
>     Daniel Rodríguez
> 
>     Sr. Equipment Compliance Specialist EMEA
> 
>     T +34 673556249
> 
>     E drodrig...@ecolab.com mailto:drodrig...@ecolab.com
> 
>     ecolab.com
> 
>      
> 
>     From: Chris Wordley <chris.word...@conformance.co.uk>
>     Sent: Thursday, 19 November 2020 18:06
>     To: EMC-PSTC@LISTSERV.IEEE.ORG
>     Subject: Re: [PSES] TRAVEL ADAPTORS-EU regulation that forbids use in 
> professional equipment?
> 
>      
> 
>     Caution: This email message originated from outside of the organization. 
> DO NOT CLICK on links or open attachments unless you recognize the sender and 
> know the content is safe. If you think it is suspicious, please report as 
> suspicious.
> 
> 
> 
>     Hi Daniel
> 
>      
> 
>     See Part II of the UK regulations 
> https://www.legislation.gov.uk/uksi/1994/1768/made/data.pdf 
> https://urldefense.com/v3/__https:/www.legislation.gov.uk/uksi/1994/1768/made/data.pdf__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWHaAs8Nn$
>   
> 
>      
> 
>     Best Regards
> 
> 
>     Chris Wordley
>     Senior Consultant
>     email: chris.word...@conformance.co.uk 
> mailto:chris.word...@conformance.co.uk  
>     Direct Line: 01298 873817
> 
>     Mobile: 07856 520321
> 
> 
> 
>     Join us for CE marking training - Click here to see our scheduled courses 
> for 2020 
> https://urldefense.com/v3/__https:/www.conformance.co.uk/our-services/ce-marking-training-risk-assessment__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWMH6FgnD$
> 
> 
> 
> 
>     Conformance Limited. The Old Methodist Chapel, Great Hucklow, Buxton, 
> SK17 8RG England
> 
>     Tel. +44 1298 873800, Fax. +44 1298 873801, www.conformance.co.uk 
> https://urldefense.com/v3/__http:/www.conformance.co.uk/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWLyKgMs-$
>     Registered in England, Company No. 3478646
> 
>      
> 
>         > > 
> >         On 19 Nov 2020, at 15:15, MIKE SHERMAN <msherma...@comcast.net 
> > mailto:msherma...@comcast.net > wrote:
> > 
> >          
> > 
> >         For Switzerland, the adaptor must be certified to SEV1011 and must 
> > be "fixed." Be aware that most "travel adaptors" are not certified and are 
> > not fixed.
> > 
> >         I found the authorities in Switzerland to be quite helpful; contact 
> > me directly for more information.
> > 
> >         Mike Sherman
> > 
> >         Graco Inc.
> > 
> >             > > > 
> > >             On 11/19/2020 8:49 AM Rodriguez, Daniel (ESP) 
> > > <0000123de38bd494-dmarc-requ...@listserv.ieee.org 
> > > mailto:0000123de38bd494-dmarc-requ...@listserv.ieee.org > wrote:
> > > 
> > >              
> > > 
> > >              
> > > 
> > >             Good morning all
> > > 
> > >             I got from engineering that they want to provide a plug 
> > > adaptor for Europe plugs instead of adding the cord and each European 
> > > plug (UK, Germany, Switzerland,....). This is only for professional use 
> > > as the user is trained
> > > 
> > >              
> > > 
> > >             I know that it is not advisable and the best is to use a IEC 
> > > 60320 connector but...
> > > 
> > >             Do you know if there any EU country regulation that forbids 
> > > expressly to use it? If yes can you provide the link....
> > > 
> > >              
> > > 
> > >             Thank you for your support!
> > > 
> > >              
> > > 
> > >             Kind Regards / Saludos cordiales / Mit freundlichen Grüßen
> > > 
> > >              
> > > 
> > >             Daniel Rodríguez
> > > 
> > >             Sr. Equipment Compliance Specialist EMEA
> > > 
> > >             T +34 673556249
> > > 
> > >             E drodrig...@ecolab.com 
> > > mailto:drodriguez@ecolab.comhttp://ecolab.com
> > > 
> > >              
> > > 
> > >             CONFIDENTIALITY NOTICE: This e-mail communication and any 
> > > attachments may contain proprietary and privileged information for the 
> > > use of the designated recipients named above. Any unauthorized review, 
> > > use, disclosure or distribution is prohibited. If you are not the 
> > > intended recipient, please contact the sender by reply e-mail and destroy 
> > > all copies of the original message.
> > > 
> > >             -
> > >             
> > > ----------------------------------------------------------------
> > > 
> > >             This message is from the IEEE Product Safety Engineering 
> > > Society emc-pstc discussion list. To post a message to the list, send 
> > > your e-mail to <emc-p...@ieee.org mailto:emc-p...@ieee.org >
> > > 
> > >             All emc-pstc postings are archived and searchable on the web 
> > > at: http://www.ieee-pses.org/emc-pstc.html 
> > > https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWF8UiKqM$
> > > 
> > >             Attachments are not permitted but the IEEE PSES Online 
> > > Communities site at http://product-compliance.oc.ieee.org/ 
> > > https://urldefense.com/v3/__http:/product-compliance.oc.ieee.org/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWB7sY6SZ$
> > >  can be used for graphics (in well-used formats), large files, etc.
> > > 
> > >             Website: http://www.ieee-pses.org/ 
> > > https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWNCrMO1b$
> > >             Instructions: http://www.ieee-pses.org/list.html (including 
> > > how to unsubscribe) 
> > > https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWDVDA7r6$
> > >             List rules: http://www.ieee-pses.org/listrules.html 
> > > https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWDBJxfZZ$
> > > 
> > >             For help, send mail to the list administrators:
> > >             Scott Douglas <sdoug...@ieee.org mailto:sdoug...@ieee.org >
> > >             Mike Cantwell <mcantw...@ieee.org mailto:mcantw...@ieee.org >
> > > 
> > >             For policy questions, send mail to:
> > >             Jim Bacher <j.bac...@ieee.org mailto:j.bac...@ieee.org >
> > >             David Heald <dhe...@gmail.com mailto:dhe...@gmail.com >
> > > 
> > >         > > 
> >         -
> >         ----------------------------------------------------------------
> > 
> >         This message is from the IEEE Product Safety Engineering Society 
> > emc-pstc discussion list. To post a message to the list, send your e-mail 
> > to <emc-p...@ieee.org mailto:emc-p...@ieee.org >
> > 
> >         All emc-pstc postings are archived and searchable on the web at: 
> > http://www.ieee-pses.org/emc-pstc.html 
> > https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWF8UiKqM$
> > 
> >         Attachments are not permitted but the IEEE PSES Online Communities 
> > site at http://product-compliance.oc.ieee.org/ 
> > https://urldefense.com/v3/__http:/product-compliance.oc.ieee.org/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWB7sY6SZ$
> >  can be used for graphics (in well-used formats), large files, etc.
> > 
> >         Website: http://www.ieee-pses.org/ 
> > https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWNCrMO1b$
> >         Instructions: http://www.ieee-pses.org/list.html (including how to 
> > unsubscribe) 
> > https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWDVDA7r6$
> >         List rules: http://www.ieee-pses.org/listrules.html 
> > https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWDBJxfZZ$
> > 
> >         For help, send mail to the list administrators:
> >         Scott Douglas <sdoug...@ieee.org mailto:sdoug...@ieee.org >
> >         Mike Cantwell <mcantw...@ieee.org mailto:mcantw...@ieee.org >
> > 
> >         For policy questions, send mail to:
> >         Jim Bacher <j.bac...@ieee.org mailto:j.bac...@ieee.org >
> >         David Heald <dhe...@gmail.com mailto:dhe...@gmail.com >
> > 
> >     > 
>      
> 
>     -
>     ----------------------------------------------------------------
> 
>     This message is from the IEEE Product Safety Engineering Society emc-pstc 
> discussion list. To post a message to the list, send your e-mail to 
> <emc-p...@ieee.org mailto:emc-p...@ieee.org >
> 
>     All emc-pstc postings are archived and searchable on the web at: 
> http://www.ieee-pses.org/emc-pstc.html 
> https://urldefense.com/v3/__http:/www.ieee-pses.org/emc-pstc.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWF8UiKqM$
> 
>     Attachments are not permitted but the IEEE PSES Online Communities site 
> at http://product-compliance.oc.ieee.org/ 
> https://urldefense.com/v3/__http:/product-compliance.oc.ieee.org/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWB7sY6SZ$
>  can be used for graphics (in well-used formats), large files, etc.
> 
>     Website: http://www.ieee-pses.org/ 
> https://urldefense.com/v3/__http:/www.ieee-pses.org/__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWNCrMO1b$
>     Instructions: http://www.ieee-pses.org/list.html (including how to 
> unsubscribe) 
> https://urldefense.com/v3/__http:/www.ieee-pses.org/list.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWDVDA7r6$
>     List rules: http://www.ieee-pses.org/listrules.html 
> https://urldefense.com/v3/__http:/www.ieee-pses.org/listrules.html__;!!Nkc5UzxO!5bnEuetog05FWI9IYaQ8TjbnVczVKNNE72vHu7mzwPo4lr9TT_KFafPnWDBJxfZZ$
> 
>     For help, send mail to the list administrators:
>     Scott Douglas <sdoug...@ieee.org mailto:sdoug...@ieee.org >
>     Mike Cantwell <mcantw...@ieee.org mailto:mcantw...@ieee.org >
> 
>     For policy questions, send mail to:
>     Jim Bacher <j.bac...@ieee.org mailto:j.bac...@ieee.org >
>     David Heald <dhe...@gmail.com mailto:dhe...@gmail.com >
> 
>     -
>     ----------------------------------------------------------------
> 
>     This message is from the IEEE Product Safety Engineering Society emc-pstc 
> discussion list. To post a message to the list, send your e-mail to 
> <emc-p...@ieee.org mailto:emc-p...@ieee.org >
> 
>     All emc-pstc postings are archived and searchable on the web at: 
> http://www.ieee-pses.org/emc-pstc.html
> 
>     Attachments are not permitted but the IEEE PSES Online Communities site 
> at http://product-compliance.oc.ieee.org/ can be used for graphics (in 
> well-used formats), large files, etc.
> 
>     Website: http://www.ieee-pses.org/
>     Instructions: http://www.ieee-pses.org/list.html (including how to 
> unsubscribe) http://www.ieee-pses.org/list.html
>     List rules: http://www.ieee-pses.org/listrules.html
> 
>     For help, send mail to the list administrators:
>     Scott Douglas <sdoug...@ieee.org mailto:sdoug...@ieee.org >
>     Mike Cantwell <mcantw...@ieee.org mailto:mcantw...@ieee.org >
> 
>     For policy questions, send mail to:
>     Jim Bacher <j.bac...@ieee.org mailto:j.bac...@ieee.org >
>     David Heald <dhe...@gmail.com mailto:dhe...@gmail.com >
> 

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc 
discussion list. To post a message to the list, send your e-mail to 
<emc-p...@ieee.org>

All emc-pstc postings are archived and searchable on the web at:
http://www.ieee-pses.org/emc-pstc.html

Attachments are not permitted but the IEEE PSES Online Communities site at 
http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used 
formats), large files, etc.

Website:  http://www.ieee-pses.org/
Instructions:  http://www.ieee-pses.org/list.html (including how to unsubscribe)
List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:
Scott Douglas <sdoug...@ieee.org>
Mike Cantwell <mcantw...@ieee.org>

For policy questions, send mail to:
Jim Bacher:  <j.bac...@ieee.org>
David Heald: <dhe...@gmail.com>

Reply via email to