Paul There's no legal requirement to apply Harmonised Standards from the LVD and EMCD under RED (or under LVD or EMCD for that matter)
However, I've recently been told that where HS from these Directives have not been applied, market surveillance/enforcement would want to see that the manufacturer had documented a proper Risk Assessment in arriving at the standards chosen. This would be relevant where, for example, a manufacturer was continuing to apply EN 60950-1 and not EN 62368-1: 2014 For EMC, it's useful to review guidance in EN 303 446-1 V1.2.1 and EN 303 446-2 V1.2.1 for application of EMC standards to radio and non-radio function of the product Best regards Charlie Charlie Blackham Sulis Consultants Ltd Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Paul Scott <paul.sc...@mitel.com> Sent: 16 February 2021 14:38 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] RED: Legal requirement to use LVD or EMCD Harmonized Standards The RED refers to the LVD and EMCD objectives when it comes to setting the essential requirements. Is there a legal requirement to apply harmonized standards (from the LVD and EMCD where applicable) in order to achieve presumption of conformity for CE marking requirements? Regards, Paul Scott ________________________________ NOTE: This e-mail (including any attachments) is for the sole use of the intended recipient(s) and may contain information that is confidential and/or protected by legal privilege. Any unauthorized review, use, copy, disclosure or distribution of this e-mail is strictly prohibited. If you are not the intended recipient, please notify Mitel immediately and destroy all copies of this e-mail. Mitel does not accept any liability for breach of security, error or virus that may result from the transmission of this message. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>