This does give us a bit of breathing space…. Thanks for letting us know! Dave. Kennedy
> On Aug 24, 2021, at 5:51 AM, Matthew Wilson | GBE > <matthew.wil...@gbelectronics.com> wrote: > > For those involved in UKCA Marking, note that the UK's decision to accept CE > Marking on equipment put on the market in Great Britain has been extended by > a year. An extra year of transition period now exists. The UK will allow CE > Marked equipment into Great Britain until 1 January 2023 (Northern Ireland is > a special case requiring CE marking). > > This is a UK decision and it is not an MRA between the UK and EU. UKCA > Marking is still available for those who wish to use it, or need to use it, > and for equipment which requires 3rd party certification by an Approved Body. > > For the link to the details, see this: > https://www.gov.uk/guidance/placing-manufactured-goods-on-the-market-in-great-britain > > Maybe they will sort out a MRA and remove all the duplication and additional > red tape having two compliance mark schemes brings! Probably too much of a > political banana skin to happen though. > > Regards to all. > > > <image950405.png> > Disclaimer: This email and any files transmitted with it are confidential > and intended solely for the use of the individual or entity to whom they are > addressed. If you have received this email in error please delete it from > your system, do not use or disclose the information in any way and notify the > sender immediately. The contents of this message may contain personal views > which are not the views of the company, unless specifically stated. > GB Electronics (UK) Ltd is a company registered in England and Wales under > number 06210991. > Registered office: Ascot House Mulberry Close, Woods Way, Goring By Sea, > West Sussex, BN12 4QY. > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org <mailto:emc-p...@ieee.org>> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org>> > Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org>> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org>> > David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com>> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
