Its been a while since I looked - but I think the standards typically lists the changes and differences. Or has that changed?
On Fri, Feb 11, 2022 at 4:41 PM Ryan Jazz <rjayasin...@yamahaguitargroup.com> wrote: > * This message originated outside of DISH and was sent by: > rjayasin...@yamahaguitargroup.com <rjayasin...@yamahaguitargroup.com> * > ------------------------------ > > Dear Group, > > I am afraid the answer to my question may rely on purchasing ‘before and > after’ standards and sifting out the delta in order to prepare a Gap Report > to a Declaration of Conformity. > > - If there is an alternate method please advise. A recommended service > perhaps. Decoder Ring? > > At the moment I am stuck trying to come up with a *source* I can > reference to explain the difference between EN 55035:2017, vs. EN > 55035:2017/A11:2020, and EN 55032:2015, vs EN 55032:2015/A11:2020. > > This forum touched on it last October by sharing a document referring to > the Frankfort Agreement ( > https://boss.cenelec.eu/media/4dij213u/en_iecreferencing.pdf > <https://boss.cenelec.eu/media/4dij213u/en_iecreferencing.pdf> > ) > > - Is there a similar explanation for the latest amendments to 55035, > and can someone share a good source to find these difference. > > Not sure why these matters have to be so cryptic in this already mazy > world of product compliance. > > I’ve been at this since 1999 and this is one area where I have not felt > well-heeled. > > Your help and guidance is greatly appreciated. > > Ryan Jazz > > > > Ryan Jayasinghe > > Regulatory Compliance Engineer > > rjayasin...@line6.com > > > > "After silence, that which best expresses the inexpressible, is music" - > Aldous Huxley > > > > LINE6 > > 26580 Agoura Road > > Calabasas CA 91302 > > 818.575.3711 > > line6.com > > ampeg.com > > > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> > can be used for graphics (in well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > -- Charles Grasso Dish Technologies (c) 303-204-2974 (h) 303-317-5530 (e ) charles.gra...@dish.com (e2) chasgra...@gmail.com - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
