Hi everybody we are considering doing radiated emissions scans during the turntable slow rotation (about 5min/360deg) in a chamber with turntable flush on the metal floor and sliding contacts. The likely issue is ESD generated peaks coming from the sliding contacts. Anyone has experience with this setup, and in that case, what kind of mitigation techniques (if any) would be available?
I have direct experience with another chamber with a different kind of turntable (not flush, , wooden structure raised about 20cm from the ground plane) and have no issues in the 30MHz to 18GHz range. Thanks in advance Paolo - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>