Hi Brian, Good explanation! We use the method #1 that to be interpreted correctly by most of readers. The symbol of forward slash means the only amendment may not be known by all.
On Thu, 25 Aug 2022 at 03:49, Brian Kunde <bkundew...@gmail.com> wrote: > This topic goes a little deeper, I think. Question being, how are the > harmonized standards to be listed on your DoC? > > It appears to me that the Commission lists standards a couple different > ways, which adds to the confusion. For example, on the EMCD Harmonized > Standards list, it shows it one way as: > > Method #1 > EN 16361:2013+A1:2016 > > but then for another standard shows it this way: > > Method #2 > EN 50065-2-1:2003, EN 50065-2-1:2003/A1:2005, EN 50065-2-1:2003/AC:2003 > > Using the first method, the above could be listed as > > Method #1 > EN 50065-2-1:2003+AC:2033+A1:2005 > > I thought we had a discussion a year or so ago where the plus sign "+" was > to be replaced by the slash "/". If that is true, then the above could be > listed as: > > Method #3 > EN 50065-2-1:2003/AC:2033/A1:2005 > > But this method could be technically confusing thinking you are using only > the amendment to show compliance. Yet, we all know what > this really means, right?. > > So, which is correct? Does it really matter? Using method #2 above is > probably the most correct, but it is very long. I prefer method #1 or #3 > because it is shorter and gets the point across. > > Comments? > > The Other Brian > > > > > > > On Wed, Aug 24, 2022 at 11:59 AM Scott Xe <scott...@gmail.com> wrote: > >> Hi Gert, >> >> Thanks for your useful reply! The EN 55032 : 2017/A11 : 2020 contains >> the corrigendum only, no any technical changes. Does AC have another >> condition to qualify for? >> >> Will arrange some time for visiting the CENELEC site. >> >> Best regards, >> >> Scott >> >> On Wed, 24 Aug 2022 at 21:38, Gert Gremmen <g.grem...@cetest.nl> wrote: >> >>> Hi Scott, >>> >>> No only the : >>> >>> EN 55032 : 2017 is the Harmonised Standard (1 documnet) >>> EN 55032 : 2017/A11 : 2020 is the (Harmonised) amendment only (1 >>> dcoument) >>> >>> Both documents are needed. (did not check the OJ for you) >>> >>> EN 55032 : 2017+A11 : 2020 is both documents together. >>> >>> AC stands for Corrigendum, most used for plain error, typos ,wrong >>> references etc. >>> >>> There is lots of info on the site of CENELEC on these subjects. Worth so >>> spent an afternoon. >>> >>> Gert Gremmen >>> >>> On 24-8-2022 15:06, Scott Xe wrote: >>> > EN 55032 : 2017/A11 : 2020 >>> > >>> -- >>> Independent Expert on CE marking >>> EMC Consultant >>> Electrical Safety Consultant >>> >>> - >>> ---------------------------------------------------------------- >>> This message is from the IEEE Product Safety Engineering Society >>> emc-pstc discussion list. To post a message to the list, send your e-mail >>> to <emc-p...@ieee.org> >>> >>> All emc-pstc postings are archived and searchable on the web at: >>> http://www.ieee-pses.org/emc-pstc.html >>> >>> Website: http://www.ieee-pses.org/ >>> Instructions: http://www.ieee-pses.org/list.html (including how to >>> unsubscribe) >>> List rules: http://www.ieee-pses.org/listrules.html >>> >>> For help, send mail to the list administrators: >>> Mike Cantwell <mcantw...@ieee.org> >>> >>> For policy questions, send mail to: >>> Jim Bacher: <j.bac...@ieee.org> >>> David Heald: <dhe...@gmail.com> >>> _________________________________________________ >>> To unsubscribe from the EMC-PSTC list, click the following link: >>> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 >>> >> - >> ---------------------------------------------------------------- >> >> This message is from the IEEE Product Safety Engineering Society emc-pstc >> discussion list. To post a message to the list, send your e-mail to < >> emc-p...@ieee.org> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://www.ieee-pses.org/list.html (including how to >> unsubscribe) <http://www.ieee-pses.org/list.html> >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Mike Cantwell <mcantw...@ieee.org> >> >> For policy questions, send mail to: >> Jim Bacher <j.bac...@ieee.org> >> David Heald <dhe...@gmail.com> >> ------------------------------ >> >> To unsubscribe from the EMC-PSTC list, click the following link: >> https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 >> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
