Dear Experts I hope someone can help me with requirements of IEC 61010-1, more precisely with requirements of UL 61010-1.
Pressure vesel is part of the unit which needs to be certified to IEC 61010-1 and also national differences for USA/CAN. There is high presure vessel with volume 40 Liter, pressure 9 bar and max temperature 60°C. There is gas in the vessel which is not flammable neither poisonous therefore leaking is allowed.The temperature of gas will not exceed 60°C. The manufacturer of the vessel has test report according to Pressure equipment directive 2014/68EU. The certificate for vessel is issued by notified body for 2014/68EU directive. There was used for manufacture and inspection standard ASME sec. VIII-1 Ed.19 Rules for Construction of Pressure Vessels Division 1. For acceptance was used Pressure equipment directive 2014/68EU. Type certificate of conformity is Fluid group 1, category III Module B+C2. There were issued: Prototype inspection certificate Modul B, Certificate of conformity Modul C2. The vessel was also tested with 12,9 bar. Standard IEC 61010-1 has cl. 11.7 where is required to test with 2 x rated pressure. There is also NOTE which allows to use calculation for example according to the Pressure Equipment Directive 97/23 EC. The 97/23EC was replaced by 2014/68EU from 2016 July. Howeve this product needs also national differences for USA/CAN. That means that Annex G need to be applied, where is required test with 3 times rated pressure. Pressure vessel will have 9 bar pressure and this means to apply 27 bar for 1 min. We are not able to apply such pressure and there is also no possibility for working pressure to exceed gas pressure 9 bar (no connection from outside) Any idea how to come around this requirement? Thank you. Best regards, Bostjan - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
