The end product Standard usually indicates minimum flame ratings. Also, many Standards allow a end product flame test if the material rating is lower than required.
Typically (per UL 746C) – 94HB minimum for attended use products. 94V-2 minimum for unattended use, cord connected products. 94-5VA/B minimum for permanently connected (to the building) products. Many Standards also have a flame spread test requirement if the part is of a certain size. Best Regards and Be Safe, John John Allen | President & CEO | Product Safety Consulting, Inc. Your Outsourced Compliance Department® 630-238-0188, Cell: 630-330-3145 [cid:image001.jpg@01D9663E.F57B3C00][social_facebook_box_blue for signature]<http://www.facebook.com/pages/Product-Safety-Consulting-Inc/97306850917>[social_twitter_box_blue for signature]<http://twitter.com/SafetyTesting>[social_linkedin_box_blue for signature]<http://www.linkedin.com/in/productsafetyconsultinginc> https://www.youtube.com/channel/UCVSzENmSoWeNFSBQcOYN7-A www.productsafetyinc.com<http://www.productsafetyinc.com/> IEEE Product Safety Engineering Society President Elect 2023, President 2024-2025, Past President 2026 President 2016-2019 Compliance 101 Technical Committee Chairman IEEE Senior Member [cid:image005.png@01D9663E.F57B3C00] Keeping our members informed and educated on Product Safety and Compliance https://ewh.ieee.org/soc/pses/index.html Although PSC maintains the highest level of virus protection, this e-mail and any attachments should be scanned by your virus protection software. It is the responsibility of the recipient to check that it is virus free. PSC does not accept any responsibility for data loss or systems damage arising in any way from its use. This message is confidential and intended only for the individual to whom or entity to which it is addressed. If you are not the intended recipient or addressee, or an employee or agent responsible for delivering this message to the addressee, you are hereby notified that any dissemination, distribution, or copying, in whole or part, of this message is strictly prohibited. If you believe that you have been sent this message in error, please do not read it. Please immediately reply to sender that you have received this message in error. Then permanently delete all copies of the message. Thank you. From: John Cochran <jcoch...@strongarm.com> Sent: Monday, April 3, 2023 3:13 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Ferrules [EXTERNAL EMAIL] DO NOT CLICK links or attachments unless you recognize the sender and know the content is safe. Panduit PAN_TERM with vinyl insulation is UL 94V-0, John Cochran Compliance Manager jcoch...@strongarm.com<mailto:jcoch...@strongarm.com> [Image removed by sender. Strongarm Designs, Inc.]<https://strongarm.com/> Industrial workstations and mountings for the frontline workforce. Strongarm Designs, Inc. 425 Caredean Drive | Horsham, PA 19044 (800) 778-7901<tel:%208007787901> • strongarm.com<https://strongarm.com> From: sgbrody <sgbr...@comcast.net> Sent: Monday, April 3, 2023 15:46 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Ferrules CAUTION: This message originated from outside Strongarm. Do not open attachments or click on links if you do not recognize the sender. Hi all, I have a 3rd party who is requiring 94V-0 on the ferrules of a connector. Up to now the ferrules being used have been HB. What say ye, esteemed experts? Opinions, comments welcome. Sent from my T-Mobile 5G Device - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1