Although related to the installation of products and not necessarily the product desgins themselves, you might review NFPA 70, National Electric Code. They do have requirements when using multiple sources.
-Doug Douglas E Powell Laporte, Colorado USA doug...@gmail.com LinkedIn <https://www.linkedin.com/in/coloradocomplianceguy/> (UTC -06:00, US-MDT) On Thu, Apr 6, 2023 at 2:41 PM Steve Brody <sgbr...@comcast.net> wrote: > A new question. > > A client's product is using two independent AC power sources on a product, > but I can't find anything in 61010-1 60204-1 that provide any guidance on > compliance. > > The obvious is that the sections of the product that are fed from source A > or B are not interrelated in any way that would create a hazard for for the > other section, that there be a warning label adjacent to each input that > says there are multiple AC sources, and that each section has it's own > circuit protection and disconnect, even if a facility disconnect is used > for both. > > What am I missing? > > Thanks, > > > Steve Brody > sgbr...@comcast.net > C - 603 617 9116 > - > ---------------------------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to < > emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org> > David Heald <dhe...@gmail.com> > ------------------------------ > > To unsubscribe from the EMC-PSTC list, click the following link: > https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1