Hi Charles, I thought you were Mr. RF these days and didn't stoop to lowly EMC tests ;-)
Agree with Charlie on EN 55035 - - > IEC 61000-4-2 @ 8kV air and 4kV contact. Removing the built up charge from the insulated surface will be the challenge during testing. All the best James ---- Charlie Blackham wrote ---- >Charles > >Assuming it’s infrared only, EN 55035 would be a suitable product standard >(Infrared remote controls are referenced as ancillary/support equipment for >TVs in the informative Annex J) > >A wireless remote would additionally be tested to EN 301 489-x, but the test >levels are the same > >Best regards >Charlie > >Charlie Blackham >Sulis Consultants Ltd >Tel: +44 (0)7946 624317 >Web: https://sulisconsultants.com/ >Registered in England and Wales, number 05466247 > >From: Chas Grasso <[email protected]> >Sent: Thursday, April 27, 2023 11:24 PM >To: [email protected] >Subject: [PSES] ESD standards for testing remotes > >Hello gurus! > >Does anyone know of an official standard for ESD testing remotes used for TVs >/STBs etc? > >Thanking you in advance!! > > >-- >Charles Grasso >Dish Technologies > (c) 303-204-2974 >(w) 303-706-5467 >(h) 303-317-5530 >(e ) [email protected]<mailto:[email protected]> >(e2) [email protected]<mailto:[email protected]> >- >---------------------------------------------------------------- > >This message is from the IEEE Product Safety Engineering Society emc-pstc >discussion list. To post a message to the list, send your e-mail to ><[email protected]<mailto:[email protected]>> > >All emc-pstc postings are archived and searchable on the web at: >http://www.ieee-pses.org/emc-pstc.html > >Website: http://www.ieee-pses.org/ >Instructions: http://www.ieee-pses.org/list.html (including how to >unsubscribe)<http://www.ieee-pses.org/list.html> >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: >Mike Cantwell <[email protected]<mailto:[email protected]>> > >For policy questions, send mail to: >Jim Bacher <[email protected]<mailto:[email protected]>> >David Heald <[email protected]<mailto:[email protected]>> > >________________________________ > >To unsubscribe from the EMC-PSTC list, click the following link: >https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 > >- >---------------------------------------------------------------- >This message is from the IEEE Product Safety Engineering Society emc-pstc >discussion list. To post a message to the list, send your e-mail to ><[email protected]> > >All emc-pstc postings are archived and searchable on the web at: >http://www.ieee-pses.org/emc-pstc.html > >Website: http://www.ieee-pses.org/ >Instructions: http://www.ieee-pses.org/list.html (including how to >unsubscribe) >List rules: http://www.ieee-pses.org/listrules.html > >For help, send mail to the list administrators: >Mike Cantwell <[email protected]> > >For policy questions, send mail to: >Jim Bacher: <[email protected]> >David Heald: <[email protected]> >_________________________________________________ >To unsubscribe from the EMC-PSTC list, click the following link: >https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
