John:
In this case I would ask manufacturer (thru your purchasing channel) regarding marking requirements agreed as a certification requirement from the UL. That should be condition of acceptability. Have that letter or document available at time of UL inspection. Other way, I handed was to ask for certificate (or document) of acceptance (CofA or DofA) of shipment form your supplier, stating quantity part number order number meets UL component marking requirements. And store it with incoming inspection. Best Regards and Be Safe Bansi Patel BRP Consultants PSES BoG at large 2020-2023 PSES Vice President of Conferences 2020-2024 bansipate...@gmail.com <mailto:bansipate...@gmail.com> M: <tel:909-260-9403> 909-260-9403 Please plan to attend (Face-2-Face event): ISPCE 2024 , May 2024 (Dates to be determined soon); Chicago Area, Illinois, USA https://2024.psessymposium.org <https://2024.psessymposium.org/> From: John Allen <jral...@productsafetyinc.com> Sent: Tuesday, July 18, 2023 9:41 AM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Lithium Button Cell Battery - NRTL markings Hi guys, We are having a heck of time proving a button cell is actually UR - CR2354. UL IQ says it's UR. The Battery is not marked. The Guide Card allows the marking to be on "packaging". Our customer purchases the CR2354 on-line. The packaging it comes in is not marked. Is it possible the UR mark is on the Bulk packaging that the on-line supplier would have? Best Regards and Be Safe, John John Allen | President & CEO | Product Safety Consulting, Inc. Your Outsourced Compliance DepartmentR 630-238-0188, Cell: 630-330-3145 <http://www.facebook.com/pages/Product-Safety-Consulting-Inc/97306850917> <http://twitter.com/SafetyTesting> <http://www.linkedin.com/in/productsafetyconsultinginc> <https://www.youtube.com/channel/UCVSzENmSoWeNFSBQcOYN7-A> https://www.youtube.com/channel/UCVSzENmSoWeNFSBQcOYN7-A <http://www.productsafetyinc.com/> www.productsafetyinc.com IEEE Product Safety Engineering Society President Elect 2023, President 2024-2025, Past President 2026 President 2016-2019 Compliance 101 Technical Committee Chairman IEEE Senior Member Keeping our members informed and educated on Product Safety and Compliance <https://ewh.ieee.org/soc/pses/index.html> https://ewh.ieee.org/soc/pses/index.html Although PSC maintains the highest level of virus protection, this e-mail and any attachments should be scanned by your virus protection software. It is the responsibility of the recipient to check that it is virus free. PSC does not accept any responsibility for data loss or systems damage arising in any way from its use. This message is confidential and intended only for the individual to whom or entity to which it is addressed. If you are not the intended recipient or addressee, or an employee or agent responsible for delivering this message to the addressee, you are hereby notified that any dissemination, distribution, or copying, in whole or part, of this message is strictly prohibited. If you believe that you have been sent this message in error, please do not read it. Please immediately reply to sender that you have received this message in error. Then permanently delete all copies of the message. Thank you. _____ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ <https://www.mail-archive.com/emc-pstc@listserv.ieee.org/%20> Website: https://ewh.ieee.org/soc/pses/ <https://ewh.ieee.org/soc/pses/> Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) <https://ewh.ieee.org/soc/pses/list.html> List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: msherma...@comcast.net <mailto:msherma...@comcast.net> Rick Linford at: linf...@ieee.org <mailto:linf...@ieee.org> For policy questions, send mail to: Jim Bacher at: j.bac...@ieee.org <mailto:j.bac...@ieee.org> _____ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC <https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1> &A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: msherma...@comcast.net Rick Linford at: linf...@ieee.org For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
