Hi Bart, Thanks for answering. I have looked into pages like this, and I think that my question actually can be turned into: Does Canada accept CISPR 32? If so it must be this standard that has to be mentioned on the label.
Mvh./Regards, Niels Hougaard Bolls ApS Denmark Tlf. 4818 3566 Direkte 5379 6991 [ http://www.bolls.dk/ | www.bolls.dk ] Fra: "bart de geeter" <bart.de.gee...@telenet.be> Til: "Niels Hougaard" <n...@bolls.dk>, "EMC-PSTC" <EMC-PSTC@LISTSERV.IEEE.ORG> Sendt: fredag, 6. oktober 2023 12:13:27 Emne: RE: [PSES] Labelling in Canada Hi Niels, Did you look into the below webpage? [ https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/devices-and-equipment/interference-causing-equipment-standards-ices/ices-gen-general-requirements-compliance-interference-causing-equipment#s5.3 | https://ised-isde.canada.ca/site/spectrum-management-telecommunications/en/devices-and-equipment/interference-causing-equipment-standards-ices/ices-gen-general-requirements-compliance-interference-causing-equipment#s5.3 ] Greetings, Bart From: Niels Hougaard <000027ee5df789dc-dmarc-requ...@listserv.ieee.org> Sent: vrijdag 6 oktober 2023 10:03 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Labelling in Canada Hello, Product in question is a loudspeaker for commercial marked. It is going to be sold in Canada and question is, if the labelling concerning EMC should be This Class B apparatus complies with Canadian ICES-003. Cet appareil de la classe B est conforme à la norme NMB-003 du Canada. or if Canada accept CISPR 32 so that the labelling should be This apparatus complies with Can/CSA CISPR 32-17 (B) Cet appareil est conforme à la norme NMB-CISPR 32-17 du Canada. Mvh./Regards, Niels Hougaard Bolls ApS Denmark Tlf. 4818 3566 Direkte 5379 6991 [ http://www.bolls.dk/ | www.bolls.dk ] This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to All emc-pstc postings are archived and searchable on the web at: [ https://www.mail-archive.com/emc-pstc@listserv.ieee.org/%20 | https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ ] Website: [ https://ewh.ieee.org/soc/pses/ | https://ewh.ieee.org/soc/pses/ ] Instructions: [ https://ewh.ieee.org/soc/pses/list.html | https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) ] List rules: [ https://ewh.ieee.org/soc/pses/listrules.html | https://ewh.ieee.org/soc/pses/listrules.html ] For help, send mail to the list administrators: Mike Sherman at: [ mailto:msherma...@comcast.net | msherma...@comcast.net ] Rick Linford at: [ mailto:linf...@ieee.org | linf...@ieee.org ] For policy questions, send mail to: Jim Bacher at: [ mailto:j.bac...@ieee.org | j.bac...@ieee.org ] To unsubscribe from the EMC-PSTC list, click the following link: [ https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 | https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 ] - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/emc-pstc@listserv.ieee.org/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://ewh.ieee.org/soc/pses/listrules.html For help, send mail to the list administrators: Mike Sherman at: msherma...@comcast.net Rick Linford at: linf...@ieee.org For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
