We are looking to replace our "too old to repair" test equipment. Our old equipment was a Turn-Key system that would do Harmonics, Flicker, Dips, ARB, Power Analyzer, etc.. The Programmable Power Supply is the main piece of equipment that failed. It had programmable output impedance ability which is required for some of these tests.
So I am looking for any and all recommendations. What are most other labs using? Are they all using these Turn-Key systems or are discrete components available to build a system that does the job better? Please help. I believe any replies listing specific brands or models of test equipment would go against this Group's Rules, so please reply to me directly. Thanks so very much. The Other Brian (from SW Michigan) - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
