Looks like -n didn't get what you may need so I also did -v
[EMAIL PROTECTED]:~$ lspci -n
0000:00:00.0 0600: 8086:2530 (rev 04)
0000:00:01.0 0604: 8086:2532 (rev 04)
0000:00:1e.0 0604: 8086:244e (rev 04)
0000:00:1f.0 0601: 8086:2440 (rev 04)
0000:00:1f.1 0101: 8086:244b (rev 04)
0000:00:1f.2 0c03: 8086:2442 (rev 04)
0000:00:1f.3 0c05: 8086:2443 (rev 04)
0000:00:1f.4 0c03: 8086:2444 (rev 04)
0000:00:1f.5 0401: 8086:2445 (rev 04)
0000:01:00.0 0300: 10de:002d (rev 15)
0000:02:0a.0 0780: 9710:9815 (rev 01)
0000:02:0b.0 0c03: 1033:0035 (rev 43)
0000:02:0b.1 0c03: 1033:0035 (rev 43)
0000:02:0b.2 0c03: 1033:00e0 (rev 04)
0000:02:0d.0 0780: 14f1:1036 (rev 08)
[EMAIL PROTECTED]:~$ lspci -v
0000:00:00.0 Host bridge: Intel Corporation 82850 850 (Tehama) Chipset Host
Bridge (MCH) (rev 04)
Flags: bus master, fast devsel, latency 0
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
0000:00:01.0 PCI bridge: Intel Corporation 82850 850 (Tehama) Chipset AGP Bridge
(rev 04) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc900000-fe9fffff
Prefetchable memory behind bridge: f0600000-f46fffff
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 04) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: f4700000-f47fffff
0000:00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 04)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 04) (prog-if
80 [Master])
Subsystem: Intel Corporation: Unknown device 4d44
Flags: bus master, medium devsel, latency 0
I/O ports at ffa0 [size=16]
0000:00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 04)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 4d44
Flags: bus master, medium devsel, latency 0, IRQ 5
I/O ports at ef40 [size=32]
0000:00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 04)
Subsystem: Intel Corporation: Unknown device 4d44
Flags: medium devsel, IRQ 9
I/O ports at efa0 [size=16]
0000:00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 04)
(prog-if 00 [UHCI])
Subsystem: Intel Corporation: Unknown device 4d44
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at ef80 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97
Audio (rev 04)
Subsystem: Intel Corporation: Unknown device 4d44
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at e800 [size=256]
I/O ports at ef00 [size=64]
0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2
Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
Subsystem: Palit Microsystems Inc. Palit Microsystems Daytona TNT2 M64
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Memory at f2000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at fe9f0000 [disabled] [size=64K]
Capabilities: <available only to root>
0000:02:0a.0 Communication controller: NetMos Technology PCI 9815 Multi-I/O
Controller (rev 01)
Subsystem: LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
Flags: medium devsel, IRQ 11
I/O ports at dff0 [size=8]
I/O ports at dfe0 [size=8]
I/O ports at dfa8 [size=8]
I/O ports at dfa0 [size=8]
I/O ports at df98 [size=8]
I/O ports at df80 [size=16]
0000:02:0b.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Belkin Root Hub
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at feafd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:02:0b.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Belkin Root Hub
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:02:0b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20
[EHCI])
Subsystem: Belkin Root Hub
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:0d.0 Communication controller: Conexant HCF 56k Data/Fax/Voice/Spkp
Modem (rev 08)
Subsystem: Conexant HCF 56k Data/Fax/Voice/Spkp Modem
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at feae0000 (32-bit, non-prefetchable) [size=64K]
I/O ports at df90 [size=8]
Capabilities: <available only to root>
[EMAIL PROTECTED]:~$
Hope this givews you some insight into a solution for my latency failures.
Jack Ensor
Quoting paul_c <[EMAIL PROTECTED]>:
>
> Hi Jack
>
> On Tuesday 13 March 2007 19:49, Jack Ensor wrote:
> > When I run the latency test I get:
> > RTD| -982| -1005| -116| 7708| 206073|
> 5
> > with an overrun occuring approximately every 62 secs or so.
>
> Yup, it certainly looks like you have a problem with the hardware, now could
>
> you cut'n'paste the output from `lspci -nn` - This displays information about
>
> some of the hardware in your computer in a format that can be compared with
> the known problematic h/w.
>
>
> Regards, Paul.
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
