On Sunday 06 May 2007, Ray Henry wrote:
>Congrats Gene.
>
>On Sun, 2007-05-06 at 10:56 -0400, Gene Heskett wrote:
>> And if I had write perms on the wiki, I'd
>> record it there for future references.
>
>Look at
>
>http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?BasicSteps
Thanks, I'll take a look at that when I have the networking stabilized, its
running on the dhcpd server in the router, which is the x86 version of
dd-wrt, the best kept secret in the router world right now. Booting from a
cf card in a junky of x86 box with 2 nics or more in it, its transparent and
16" of armor plate between me and the nets black hats.
>It'll tell you how to set yourself up to edit pages. I believe I'd
>start by putting the text of this post in there and then add the little
>bit that is required to get the probe command.
>
>HTH
>
>Rayh
;-) Thanks for the flowers Ray, but I'm not there yet. It still isn't
actually interfacing with the g38.2 command to control it. And that's what I
need, the third and hopefully last line to put in standard_pinout.hal that
will couple it up and enable g38.2 to work.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
The flow chart is a most thoroughly oversold piece of program documentation.
-- Frederick Brooks, "The Mythical Man Month"
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
