Andy Holcomb wrote: > Has any buddy messed with any old Pratt and Whitney CNC Lathes? This > one has a fujisu fanuc controller, it is a turn mate 1981 model. > > Does it run steppers of servos? > > If it is Servos what would it take to get emc running it? > > Andy > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > Does this machine have a CRT or is it a single line display? I have one that was built in 82 that has a CRT and uses servo motors with encoders, I bought it to do a retro with EMC but it turned out to have been "disabled" so the machine would be replaced with a new one. Do you have the books with it? They have good schematics. Ed.
------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
