i have a stepper drive that spins the motor properly but so far i cannot
change the direction of rotation. either clockwise/counter clockwise
are set by shorting a pin to ground or leaving it open rather than 0 or
5v that the printer cable provides. can hal be used to provide an
open/ground type signal?
i presume that hal cannot fix this and i need a some sort of switch or
relay to change 0-5 volts to open/ground in a timely manner.
any suggestions are appreciated. thanks in advance.
djs
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
