Hi all, After the success I've had with EMC2 and my minimill, I've decided to take a whack at converting a little Prazi 5x12 lathe I have. So far I've got it "steppered" and I have procured a PC on which I've installed EMC2 from the live CD. So far so good.
On the minimill I'm using a PMDX i/o card with great success. However, it occurs to me that for the lathe I am not going to need much of the functionality of this card. (independant pulse generation, high-current relays, etc.) It wasn't horrendously expensive (I want to say it was just over $100) but I'm trying to do the lathe on the cheap, so I'm wondering if anybody could suggest a less-expensive basic i/o card that has only the optoisolators without all the extras. Either preassembled or a kit wuld be fine. thanks, Pat ================== Patrick Ferrick KA2AYK Town of Webb School Main Street Old Forge, NY 13420 (315) 369-3222 (315) 369-6216 (fax) ================== ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users