> Hi, > My Mazak has the orginal pulsecoder like the one that came off the > front panel of the Mazak at Galesburg. > Since I have unused encoder channels on my STG I'm wondering what > hoops I have to jump thru to > get it to drive jogging? > I did take a quick look at the wiki but since my setup will be > different than the Galesburg one it really cannot be used for > an example; at least by me. :-( > Dave
If you can test the encoder counter with halmeter and it works with your wheel then it's a fairly simple thing to hook up the relevant pins to EMC. Jogging specifically is hooked up to the motioncontroller in EMC, but some other things you might want to do from a hardware front panel require halui. My initial setup is described here: http://www.anderswallin.net/2006/11/jogging-emc2/ I invite anyone with energy and enthusiasm to take the text and scripts from my page, make them better, and publish on the wiki! regards, Anders ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
