Michel Gouget wrote: > Dear All, > > I have just put online my Surfacing Druid, an interactive program for doing > surfacing operations. > > While EMC and NC mills are wonderful, I always found that writing g-code for > simple operations was overkill, and I usually end up doing things by end > using the jogging buttons. > > So I decided to design druids for doing interactively simple things. Just in case somebody has use for them, I have a bunch of small c programs that I use all the time for simple operations. I have programs to bore circular and rectangular pockets, "trepan" out circular and rectangular cutouts in panels without having to chew up the entire interior, do a circular or rectangular pattern of holes, mill threads, peck drill holes, use a file of X-Y coords to make programs to spot drill, drill and tap an irregular array of holes, and so on. As I need particular functions, I write them, like I recently wanted slots with rounded ends. I haven't put them all on my web page yet, but see http://jelinux.pico-systems.com/gcode.html for the ones I have.
Jon ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
